Test Range
|
0-5mm(0.25in)up to 0-10,000mm (400 in.) in steel at 5930m/s (19455f/s)
|
Velocity
|
1000 - 10,000 m/s continuously variable.
|
Probe Zero
|
0 to 999.999 µs.
|
Delay
|
0-10,000m (400in) in steel at 5930m/s (19455f/s)
|
Gain
|
0 to 110dB adjustable in 0.5, 1, 2, 6,10, 14 and 20dB steps.
|
Test Modes
|
Pulse echo and transmit/receive.
|
Pulser
|
200V fixed. 50nS square wave. Rise/Fall times <5nS into 50R load.
|
Damping
|
50 and 400 Ohm damping selectable.
|
Active Edge TM
|
Unique Active Edge Mode for improved near-surface resolution.
|
P.R.F
|
Adjustable 5Hz to 1kHz. External sync also available.
|
Screen Update Rate
|
60Hz
|
Rectification
|
RF, Full wave, +ve half-wave and -ve half-wave.
|
Frequency Range
|
1.0MHz to 14MHz
|
System Linearity
|
Vertical = 0.5% Full Screen Height (FSH). Horizontal +-0.2% Trace Full Screen Width (FSW).
|
AGC
|
Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%.
|
|
|
Measurement Modes
|
|
Mode 1
|
Signal monitor, Gate alarms can be active but no measurements are displayed.
|
Mode 2
|
Depth and amplitude of first signal in gate.
|
Mode 3
|
Echo-Echo distance measurements.
|
Mode 4
|
Trigonometric display of beam-path, surface distance (including X-offset) and depth of indication from the inspection surface together with echo amplitude. Curved surface correction canbe applied for convex and concave surfaces. Half-skip can be indicated on screen.
|
Mode 5
|
Gate to Gate distance measurement
|
Mode 6
|
Flank to Flank
|
Mode 7
|
Beam Angle, calculated from beampath, hole radius and hole centre depth.
|