Ultrasonic Thickness Gauge Special U-1 - Each
NDT equipment, repair and calibration.

Ultrasonic Thickness Gauge Special U-1

Each Simple to use handheld gauge / complete kit

Ultrasonic Thickness Gauge Special U-1
395.00 *Prices are exclusive of VAT
Article code10002
I.Introduction:

M-1 Ultrasonic Thickness Gauge measures the thickness of an object by precisely calculating the time of the probe sending ultrasonic pulse with the help of couplant to the object and passing through the object until the probe receiving the reflection form the boundary.The operating principle is P-E(pause-echo).The measuring range is 0.031~11.811inch.

II.Parameter:

Operating principle:
Ultrasonic pulse/echo method with dual-element probes
Probe zero adjustment
Selectable: 1-point calibration: normal measurement
                    2-point calibration: curve surface measurement or other special application with a high precision
V-path correciton:
Automatic
Measureing range:
0.8mm~300mm,0.031~11.8in
Depending on probe, material and surface condition
Resolution:
0.001in or 0.1mm
Measuring error:
Up to 1in: ±0.002in or ±0.1mm
Above 1in:+/-1%H
H is the height of the testing object
Repeatability:
±0.001in or ±0.1mm
Units:
Selectable: inch or mm
Display:
128*64 dot-matrix LCD screen(1.65*2.24in,42*57mm)
EL backlight and switchable contract ratio
Digit height: 0.54in or 13.75mm
Measurement update rate:
4 Hz in standard measurement mode
25 Hz in MIN capture mode
Material velocity range:
1000~9999m/s,0.039~0.394inch/µs
Power:
Two 1.5V AA alkaline batteries
Warning with low battery voltage
Operating time:
Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode
Auto shut-off:
After 5 minutes of non-use
Operating temperature:
-10...+50?,+14...+122?
Size:
5.86*2.87*1.25in,149*73*32mm(H*W*D)
Weight:
200g,7oz
New in our collection